Description
A formulation of weakly foaming, non-ionic surfactants and is especially applied at the degreasing of industrial plants and boilers. The temperature should be higher than 70°C.Benefits
- Shows a good spontaneous emulsification.
- A high capability of detaching contamination such as oil, fat and resin.
- Reduces the surface tension enabling also surfaces which are difficult to wet to quickly come into contact with the degreasing solution.
- Resistant to high temperatures and has only a small tendency of foam formation.
Dosing, Addition
Dependent on the degree of contamination the dosing rate of KEBOSOL EL amounts to 0.1 - 0.2 %.
The liquid form allows an easy dosing.
Usually the degreasing process is finished after 2 - 3 hours.
The temperature should be higher than 70°C.
Technical data
| Description: | colorless to yellowish highly foaming liquid |
| Density at 25°C (g/cm3): | approx. 1 |
| pH-Value (100 g/l water): | 4.5 – 7.5 |
| Solubility: | miscible |
Packing
| PE-cans: | 30 kg |
| PE-barrels: | 200 kg |
| Containers: | 1000 kg |
Storage
In closed original packages KEBOSOL EL is storable for at least 2 years.
Protect from temperatures below -10°C.
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.