Description
Formulated for a temperature range from 40° C and higher. Fields of application: Diffusion, extraction, juice purification up to crystallisation.
Benefits
- Very low dosage possible.
- Although KEBOSPUM KIS is a surface active agent itself the foaming power is extremely low and the product acts by suppressing the foam when being added to liquids which tend to form foam.
- Based on its special formulation KEBOSPUM KIS has furthermore the ability to to immediately distribute in the medium to be defoamed.
- Immediately distribute in the medium to be defoamed.
- KEBOSPUM KIS shows in all liquids a constantly high foam-destructing ability which is independent of the pH-value and kind and concentration of dissolved substances as well as of different retention times in the sugar juice.
- KEBOSPUM KIS is not steam-volatile.
Dosing, Addition
- The dosing points should always be at places of high turbulence like the suction side of pumps or control valves to ensure a homogeneous distribution of KEBOSPUM KIS already within foamforming areas.
- The necessary dosing quantities can rapidly and easily be determined at site by variation of the pump adjustment.
- The general requirement will be 10 - 20 ppm, max. 30 ppm with regard to juice.
Technical data
| Description: | colorless liquid |
| Density at 25°C (g/cm3): | approx. 1 |
| Viscosity (mPa•s) at 25°C: | approx. 800 |
Packing
| PE-barrels: | 200 kg |
| Containers: | 1000 kg |
Storage
In closed original packages KEBOSPUM KIS is storable for at least 2 years.Protect from temperatures below -10 °C.
Notes. References
In case of proper application KEBOSPUM KIS complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).Kosher Certification No.: 81173637, company number: 0351
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.