Description
In addition to the inhibitors ADACID 328 also contains dispersants thus resulting in clear and proper metal surfaces.
Benefits
- Can be used in pickling plants of all kinds - with or without regeneration plant.
- Is soluble without residues in water and in the pickling bath.
- The liquid form allows an easy dosing.
- Is free from foam so that disturbances in regeneration plants are avoided.
- Avoids excessive picklings and reduces the acid consumption.
- Subsequent surface refinements will not be influenced.
Dosing, Addition
The following dosing rates are approximate values:
- Stationary or continuous pickling plants without regeneration: system 500-1.500 g ADACID 328/m3 of pickling solution ready for use for new preparation. When the protective capacity abates add approx. 250 g/m3.
- Stationary or pass through pickling plants with regeneration system: New preparation of bath see a),
then 25-100 g ADACID 328/t pickled material. - Continuous pickling plants with regeneration system: 100-250 g ADACID 328/m3 of pickling solution ready for use for new preparation, then 10-30 g ADACID 328/t pickled material.
Technical data
| Description: | yellowish up to gold coloured liquid |
| Density at 25°C (g/cm3): | approx. 1.1 |
| pH-Value (100 g/l water): | 5 - 6 |
| Solubility in water and hydrochloric acid: | miscible |
Packing
| PE-cans: | 30 kg |
| PE-cans: | 60 kg |
| PE-barrels: | 200 kg |
| Containers: | 1000 kg |
| other packages on request |
Storage
In closed original packages ADACID 328 is storable for at least 2 years. Protect from freezing.
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.